Manfrotto achtergrondstatief

[PeterMac]

Hallo,

Ik heb volgend statief om een achtergrond te maken en heb een aantal rollen papier. maar heb een probleempje om dit deftig opgezet te krijgen en hoop dat iemand me kan helpen.

http://www.camex.nl/camex/RAPRD/MANFROTTO-314-PORT.ACHTERGR.SET/100013689.html?ab_agid=80102

Die 2 kleine zwarte dingetjes aan de horizontale buis zijn volgende klemmen maar ik heb geen idee hoe deze precies gebruikt worden of wat nu de juiste manier is om een rol of stuk papier hieraan op te hangen

http://www.manfrotto.com/Jahia/site/manfrotto/lang/fr/pid/2693?livid=53&idx=60?livid=53&idx=60

Heeft er toevallig iemand een gelijkaardige set en kan die me wat uitleg verschaffen ? Of een foto van hoe jullie dit gebruiken ?

Alvast bedankt,

[RobMitchell]

Re: Manfrotto achtergrondstatief

You simply take off the clamps and slide the horizontal bar through the roll of paper.. You need to take off the very small clamps on the end of the manfrotto bar before sliding through a roll. I use Colorama paper rolls and those "T" screws don't fit through the cardboard tube.

The clamps in the picture are just extra accessories to hang cloth, lamps, small paper... You don't need them when using roll background paper.

[PeterMac]

Re: Manfrotto achtergrondstatief

You simply take off the clamps and slide the horizontal bar through the roll of paper.. You need to take off the very small clamps on the end of the manfrotto bar before sliding through a roll. I use Colorama paper rolls and those "T" screws don't fit through the cardboard tube.

The clamps in the picture are just extra accessories to hang cloth, lamps, small paper... You don't need them when using roll background paper.

Thanks, I just tried it out and it seems to be working almost perfect ...
One thing I'm struggling with is that due to the weight of the paper, the roll "unrolls" automatically. Any tips to block this without damaging the paper itself ?

[RobMitchell]

Re: Manfrotto achtergrondstatief

Thanks, I just tried it out and it seems to be working almost perfect ...
One thing I'm struggling with is that due to the weight of the paper, the roll "unrolls" automatically. Any tips to block this without damaging the paper itself ?

Use one of the extra clamps to just grip the edge of the roll. Just put one side of the clamp into the roll and it will block itself on the tripod, stopping the roll from turning.
I actually use 2 cheap ( €1 ) clamps from the Gamma for this, they just grip enough without damaging the paper at all.

Excuse the poor illustration but I hope it helps.



Rob.