FinePix S5 Pro Firmware (camera control software) Update Ver.1.04
Applicable model: FinePix S5 Pro
•Detail of the update
The firmware update Ver.1.04 incorporates the following issues.
1. Better white balance when setting FLASH-mode for the WHITE BLANCE.
2. Better white balance when setting AUTO-mode for the WHITE BLANCE and using Nikon non-CPU lenses.
*It requires to set the maximum aperture according to the FinePix S5 Pro Owener's Manual(p.121-p.124).
•Precaution
1)If firmware upgrading fails, the camera may no longer operate correctly in some cases.
Carefully read the notes provided here.
2)Always use the AC adapter or the full charged battery NP-150 when upgrading the firmware.
Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
3)Firmware upgrading takes approximately 1 minutes.
en hier is de link
Applicable model: FinePix S5 Pro
•Detail of the update
The firmware update Ver.1.04 incorporates the following issues.
1. Better white balance when setting FLASH-mode for the WHITE BLANCE.
2. Better white balance when setting AUTO-mode for the WHITE BLANCE and using Nikon non-CPU lenses.
*It requires to set the maximum aperture according to the FinePix S5 Pro Owener's Manual(p.121-p.124).
•Precaution
1)If firmware upgrading fails, the camera may no longer operate correctly in some cases.
Carefully read the notes provided here.
2)Always use the AC adapter or the full charged battery NP-150 when upgrading the firmware.
Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
3)Firmware upgrading takes approximately 1 minutes.
en hier is de link
Comment