Issues addressed with firmware version 2.0.0
1. Image authentication item has been added to the setup menu. The optional Image Authentication software is required to authenticate images.
2. A Wireless transmitter item has been added to the setup menu. This item is available only when the optional Wireless Transmitter WT-3 is connected to the camera.
3. For more information download the supplemental manual d200-fudm.pdf. Acrobat Reader must be installed on your computer to view this file.
-> UPDATE; Sigma lenses that should be rechipped because the AF/MF, should work now !!!!
The basic steps to update the firmware are:
1. Download and expand the firmware files
2. Format an approved CF card in the camera (do not use a Microdrive card to perform this update)
3. Connect Camera to computer (in MSC USB mode) or use a CF Card Reader (do not use a Lexar Jump Shot USB cable to perform this update)
4. Copy to the top level of the card the downloaded "A firmware" file
5. Disconnect camera from computer
6. Update the firmware from the "Setup" menu
7. Follow the camera's on-screen menus
8. Repeat steps 2 through 7 using the "B Firmware"
9. Re-format Card
http://support.nikontech.com/cgi-bin...i=&p_topview=1
Lesley.
1. Image authentication item has been added to the setup menu. The optional Image Authentication software is required to authenticate images.
2. A Wireless transmitter item has been added to the setup menu. This item is available only when the optional Wireless Transmitter WT-3 is connected to the camera.
3. For more information download the supplemental manual d200-fudm.pdf. Acrobat Reader must be installed on your computer to view this file.
-> UPDATE; Sigma lenses that should be rechipped because the AF/MF, should work now !!!!
The basic steps to update the firmware are:
1. Download and expand the firmware files
2. Format an approved CF card in the camera (do not use a Microdrive card to perform this update)
3. Connect Camera to computer (in MSC USB mode) or use a CF Card Reader (do not use a Lexar Jump Shot USB cable to perform this update)
4. Copy to the top level of the card the downloaded "A firmware" file
5. Disconnect camera from computer
6. Update the firmware from the "Setup" menu
7. Follow the camera's on-screen menus
8. Repeat steps 2 through 7 using the "B Firmware"
9. Re-format Card
http://support.nikontech.com/cgi-bin...i=&p_topview=1
Lesley.
Comment