Belgiumdigital.com in samenwerking met
Weergegeven resultaten: 1 t/m 2 van 2
  1. #1

    Talking Canon EOS 40D Firmware Update Ver 1.0.5

    Canon heeft een Firmware Update Version 1.0.5 op haar website gezet. Het is ongeveer 8,0MB groot en kan via onderstaande link van de website worden gehaald.

    Maar controleer voor de installatie eerst welke Firmware er nu op zit.
    Is deze 1.0.4 of lager dan kunt u deze Firmware 1.0.5 installeren.



    Link naar de Firmware update
    http://web.canon.jp/imaging/eosd/eos...irmware-e.html

    Firmware specification changes



    This firmware update (Version 1.0.5) incorporates the following improvements and fixes.

    When playing back images just after recovering from Auto Power Off, the display now shows the last image played back.
    During remote shooting, images are now displayed on the camera's LCD monitor right after they are taken.
    Corrects a warning message in Korean that appears when updating the firmware.
    Corrects errors in the Spanish menu screens.
    Corrects a phenomenon that prevented printing with some print systems.
    Corrects a rare phenomenon in which file numbers or image numbers were sometimes skipped.
    The Version 1.0.5 firmware being released this time is for cameras with firmware up to Version 1.0.4. If the camera's firmware is already Version 1.0.5, it is not necessary to update the firmware.


    --------------------------------------------------------------------------------

    Before downloading the firmware update, please be sure to read the entire contents of this page.


    --------------------------------------------------------------------------------





    Precautions


    A power failure during the firmware writing operation may disable the camera.
    Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) ACK-E2 for the firmware update.
    Do not shut off the power during the firmware writing operation.
    Do not open the CF card slot cover during the firmware writing operation.
    Do not press any camera buttons during the firmware writing operation.




    Firmware Q&A



    Q: What has been changed in verson 1.0.5 of the firmware?
    A: It includes the following improvements and fixes:
    When playing back images just after recovering from Auto Power Off, the display now shows the last image played back.
    If the camera is automatically turned off while playing back images, the last image played back will now be shown if the power comes back on and playback operations are resumed.
    During remote shooting, images are now displayed on the camera's LCD monitor right after they are taken.
    When using remote shooting with a CF card in the camera, when transferring images to the PC and CF card, the images taken will now be displayed on the camera's LCD monitor immediately after they are taken. For information on how to set the length of time the images are displayed after they are taken, please refer to the instruction manual.
    Corrects a warning message in Korean that appears when updating the firmware.
    Corrects errors in the Spanish menu screens.
    Corrects an error in the Spanish flash C.Fn:2-1.
    Corrects a phenomenon that prevented printing with some print systems.
    Corrects a rare phenomenon in which file numbers or image numbers were sometimes skipped.
    Verzamelaar van digitale Canon en Nikon toestellen en lenzen

  2. #2

    Standaard Re: Canon EOS 40D Firmware Update Ver 1.0.5

    Dank je otto.
    Ik had nog de 1.0.3, Weet je toevallig ook de verschillen tussen 1.0.3 en 1.0.(4/5)

Regels voor berichten

  • Je mag geen nieuwe discussies starten
  • Je mag niet reageren op berichten
  • Je mag geen bijlagen versturen
  • Je mag niet je berichten bewerken
  •